Wash Away Directions

Wash-Away Directions


Wash Away Directions:

Please test thoroughly prior to beginning any project.

 

  1. Before handling Wash-Away, be sure that hands and work area are completely dry.
  2. Cut Washaway slightly larger than the hoop with about 1 inch extra all around.
  3. Hoop one layer of the stabilizer as tightly as possible. You want to achieve a tambourine-skin type tension in the hoop.
  4. Hoop the stabilizer with the fabric.
  5. Embroider your design.
  6. Trim away the excess stabilizer.
  7. Rinse away excess stabilizer using room temperature water. Tap water is fine.
  8. How much you rinse depends on the desired effect you want. The more you rinse, the softer the embroidery becomes.